Compared with pure cotton towels, microfiber towels have six characteristics.

Compared with traditional cotton towels, microfiber towels mainly have six characteristics:

High water absorption: The microfiber towel uses the orange-petal skill to divide the filaments into eight petals, which increases the surface area of the fiber and increases the porosity in the fabric. The capillary wicking effect enhances the water absorption effect. Rapid water absorption and rapid drying become its obvious characteristics.

Strong decontamination: The fineness of microfibers with a diameter of 0.4μm is only 1/10 of that of silk. The extra cross section can capture dust particles as small as a few microns more effectively. The effect of decontamination and degreasing is very obvious.

No hair removal: high-strength synthetic fiber filaments, not easy to crack, together with the fine weaving method, no spinning, no looping, the fiber is not easy to fall from the towel surface. It is used to make wipes and wipes. It is suitable for wiping the surface of bright paint, plating surface, glass, surface and liquid crystal screen. It can clean the glass during the process of car filming, and it can reach the effect of very ambiguous film.

Longevity: Due to its high strength and high resistance, its ultra-fine fiber has a service life of more than 4 times the life of a towel. It is still invariable after repeated washing. Together, the polymer fiber does not attack like cotton fiber. Protein hydrolysis, even if it is not exposed after use, will not be mildew, phlegm, and has a long life.

Easy to clean: Usually, when the towel is used, it is a natural fiber towel. The dust, grease, dirt and the like on the surface of the object are directly absorbed into the fiber. After use, it remains in the fiber and is difficult to eradicate. After a long time, it takes a long time. It will even harden and lose its elasticity, affecting the use. The microfiber towel absorbs the dirt between the fibers (instead of the inside of the fiber), and the fiber has a high fiber density and a high density, so the adsorption capacity is strong, and it is only necessary to clean with water or a little detergent after application.

No fading: dyeing process uses TF-215 and other dyes for ultra-fine fiber materials. Its retarding, transferability, high-temperature dispersibility, and color-eliminating policies all meet the severe standards of exporting international markets. The benefits of discoloration make it impossible to bring about decolorization and pollution at the time of cleaning the surface of the article.

Learn more about towel information on the China Towel Trading Network http://maojin.99114.com